Removing Bridge Port Extender from a Cascade Example

The following example shows how to remove a bridge port extender (BPE) from a cascade.

This example removes the BPE at slot 101 in a four-tier cascade and connects the BPE at slot 100 to the BPE at slot 102 (see Removing BPE from Cascade).

Click to expand in new window
Removing BPE from Cascade
GUID-91A3ECE3-74D7-476A-9786-06FC7396F540-low.png
  1. Unconfigure the bottom BPE:
    # unconfigure vpex port 102:51 slot
  2. Unconfigure the next BPE from the bottom:
    # unconfigure vpex port 101:51 slot
  3. Unconfigure the BPE being removed:
    # unconfigure vpex port 100:51 slot
  4. Disconnect BPE 101, and connect BPE 100 to BPE 102.
  5. Re-configure the BPE at slot 100:
    # configure vpex port 100:51 slot 102
  6. Re-configure the BPE at slot 102:
    # configure vpex port 102:51 slot 103
  7. Remove the slot assignment (101) from the removed BPE:
    # unconfigure slot 101