BGP Auto-peering Feature Limitations

The following features are not supported in BGP auto-peering:

• Stacking
• AutoBGP LAG with Extended Edge Switching
• Static LAG attachments to AutoBGP
• AutoBGP links on Extended Edge Switching ports
• MPLS, VPLS, L2VPN, L3VPN
• PIM Snooping, PIM-SM, SSM mode
• OSPF, OSPFv3, ISIS, RIP, RIPNG per VRF
• IPv6 within VRF
• VRF route leaking
• EVPN multi-homing Ethernet segments
• Explicit-remotes mode used for VNET flooding
• VXLAN symmetric routing
• AutoBGP MLAG
• EVPN does not interoperate with third-party devices

The following limitations apply:

• Manual configuration of MLAG is supported. One MLAG peer per leaf node.
• Loss of first multicast packet in the flow is expected due to slow path forwarding.
• Static router must be an external router per VRF.
• VLANS spanning multiple bridges, where each bridge is AutoBGP LAG connected, must be VXLAN-based, or AutoBGP LAG replaced with MLAG.
• VLANs behind a bridge that is AutoBGP LAG connected and AutoBGP node has same VLAN ports must be VXLAN-based or AutoBGP LAG replaced with MLAG.