In the following example, the default PIM-SSM range of 232.0.0.0/8 is configured. For all interfaces, non-IGMPv3 messages and IGMPv3 exclude messages are ignored for addresses in this range. Hosts that use IGMPv3 on VLAN v13 can request and receive source specific multicast streams for addresses in the PIM-SSM range.
create vlan v12 create vlan v13 configure v12 add port 1 configure v13 add port 2 configure v12 ipaddress 12.1.1.1/24 configure v13 ipaddress 11.1.1.1/24 configure pim add vlan all sparse enable ipforwarding enable ipmcforwarding enable igmp IGMPv3 configure pim ssm range default enable pim ssm vlan v13 enable pim
Note
(*;G)s are created for groups outside the SSM range. SSM may not be enabled for the ingress VLAN (see Using PIM-SSM While Sending IGMPV3 Joins (IPv4) ).