configure forwarding L2-protocol fast-convergence

configure forwarding L2-protocol fast-convergence on | off

Description

Configures the switch to flooding the unicast traffic during L2 protocol convergence.

on	Used to avoid flooding the unicast traffic during L2 protocol convergence. (default)
off	Used to Temporarily flooding unicast traffic during L2 protocol convergence.

On.

Use this command to influence the L2-protocol convergence when topology changes in the network to minimize the congestion.

The following command will influence the L2-Protocol control traffic:

configure forwarding L2-protocol fast-convergence off

This command was first available in ExtremeXOS 15.1.3.

This command is available on the Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X620, X690, X870 series switches.

Published January 2019prev | next