Configures MAC Security (MACsec) actor‘s priority for port(s).
mka | Configures MACsec key agreement (MKA) parameters. |
actor-priority | Designates setting the priority advertised during MKA key server election. |
actor-priority | Sets the actor priority value. A lower value denotes higher priority.Range is 0–255 or 0x0–0xFF. Default is 0x10. |
ports | Specifies configuring ports. |
port_list | Lists which ports to configure the actor priority on. |
Default value for actor priority is 0x10.
Important
After enabling MACsec, if you change the actor priority, you must run the configure macsec initialize ports port_list command afterward. Otherwise, the change is not accepted.# configure macsec mka actor-priority "0x5" port 13
configure macsec mka actor-priority 31 port 14
This command was first available in ExtremeXOS 30.1.
This command is available on the following platforms.
Note
The MACsec feature requires the installation of the MAC Security feature pack license.Platform | Ports | LRM/MACsec Adapter Required? |
---|---|---|
Summit X460-G2-24p-24hp, X460-G2-24t-24ht switches | Half-duplex, 1G ports (25–48) | No |
All other SFP/SFP+ ports * | Yes | |
Summit X450-G2, X460-G2, X670-G2, and ExtremeSwitching X440-G2, X620, and X690 series switches | SFP/SFP+ ports * | Yes |
Note: * For Summit X460-G2 series switches, the VIM-2X option does
not support the LRM/MACsec Adapter.
|