Banner commands

The following commands are used to configure banner messages. The banner messages are used to provide information to the user when the TOE is accessed.

• Banner incoming: sets the incoming banner message. The message is seen on the console when a user accesses the device.
• Banner motd: sets the message of the day banner. The message is displayed when the device receives a login request.

The range of banner length is from 1 to 2048 characters. Characters can be issued as a single line of text bracketed by a start character and the same character at the end.

These commands can be invoked from the CLI in configuration mode.

device # banner incoming x <message> x 

where x can be any printable character.

device # no banner incoming 
device # banner motd x <message> x
 device # no banner motd