Commands disabled in FIPS mode

The device in FIPS mode does not support the following commands:

• enable password-display
• enable strict-password-enforcement
  

  Note

  Strict password enforcement is enabled by default. The password must be at least eight characters long.
• web-management allow-no-password
• telnet server
• ip ssh scp disable
• ip ssh key-authentication no
• ip ssh permit-empty-password no
• web-management http
• enable password-display

A device in FIPS mode does not support the following TFTP commands:

• copy tftp flash ip
• boot system tftp ip file
• ip ssh pub-key-file tftp ip {file | pubkey}
• ip ssl certificate-data-file tftp ip file
• ip ssl private-key file tftp tftp file