Extreme NetIron FIPS Configuration Guide

Place the needed signature files on an accessible SCP or TFTP server.

Copy the management monitor image signature file by entering one of the following commands:

Using SCP on a remote client:
scp xmbxxxxx .siguser@device-IpAddress:flash:monitor.sig
Using TFTP at the Privileged EXEC level of the CLI:
copy tftp flash tftp-srvr xmbxxxxx.sig monitor.sig

Copy the interface module monitor image signature file by entering one of the following commands:

Using SCP on a remote client:
scp xmlbxxxxx.sig user@device-IpAddress:flash:lp-mon.sig
Using TFTP at the Privileged EXEC level of the CLI:
copy tftp flash tftp-srvr xmlbxxxxx.sig lp-mon.sig

Copy the interface module application image signature file by entering one of the following commands:

Using SCP on a remote client:
scp xmlpxxxxx.sig user@device-IpAddress:flash:[lp-pri.sig | lp-sec.sig]
Using TFTP at the Privileged EXEC level of the CLI:
copy tftp flash tftp-srvr xmlpxxxxx.sig [lp-pri.sig | lp-sec.sig]

Copy the management module application image signature file by entering one of the following commands:

Using SCP on a remote client:
scp xmrxxxxx.sig user@device-IpAddress:flash:[primary.sig | secondary.sig]
Using TFTP at the Privileged EXEC level of the CLI:
copy tftp flash tftp-srvr xmrxxxxx.sig [primary.sig | secondary.sig]

Copying the signature files for Extreme NetIron MLXe devices