The following table shows supported limits for features in the Core License.
Metric | Product | Limit |
---|---|---|
Anycast RP Using PIM—maximum number of IPv4 Anycast RP set per VR. | ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, X590, X465, X695 | 32 |
Anycast RP Using PIM—maximum number of IPv6 Anycast RP set per VR. | ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, X590, X465, X695 | 32 |
Anycast RP Using PIM—RP peers per Anycast RP set. | ExtremeSwitching X440-G2, X450-G2, X460-G2, X620, X590, X465, X695 | 10 |
BGP (aggregates)—maximum number of BGP aggregates. | ExtremeSwitching X460-G2, X590, X465, X695 | 256 |
ExtremeSwitching X450-G2 | 204 | |
BGP (networks)—maximum number of BGP networks. | ExtremeSwitching X460-G2, X590, X465, X695 | 1,024 |
ExtremeSwitching X450-G2 | 820 | |
BGP (peers)—maximum number of BGP peers. Note: With default keepalive and hold timers.
Note: Each BGPv4/BGPv6
peer handles a maximum of 50 routes.
Note: ECMP should not
be enabled for BGP.
|
ExtremeSwitching X460-G2 | 128 |
ExtremeSwitching X590, X465, X695 | 300 | |
ExtremeSwitching X450-G2 | 100 | |
BGP (peer groups)—maximum number of BGP peer groups. | ExtremeSwitching X460-G2, X590, X465, X695 | 64 |
ExtremeSwitching X450-G2 | 50 | |
BGP (policy entries)—maximum number of BGP policy entries per route policy. | ExtremeSwitching X460-G2, X590, X465, X695 | 256 |
ExtremeSwitching X450-G2 | 204 | |
BGP (policy statements)—maximum number of BGP policy statements per route policy. | ExtremeSwitching X460-G2, X590, X465, X695 | 1,024 |
ExtremeSwitching X450-G2 | 820 | |
BGP multicast address-family routes—maximum number of multicast address-family routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 25,000 |
ExtremeSwitching X450-G2 | 20,000 | |
BGP (unicast address-family routes)—maximum number of unicast address-family routes. | ExtremeSwitching X460-G2, X590, X465, X695 (at default) | 25,000 |
ExtremeSwitching X590, X465 (with ALPM enabled) | 100,000 | |
ExtremeSwitching X450-G2 | 20,000 | |
BGP (non-unique routes)—maximum number of non-unique BGP routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 25,000 |
ExtremeSwitching X450-G2 | 20,000 | |
BGP ECMP—maximum number of equal cost paths per multipath for BGP and BGPv6. | ExtremeSwitching X460-G2, X590, X465, X695 | 2, 4, 8, 16, 32, or 64 |
ExtremeSwitching X450-G2 | 64 | |
BGPv6 (unicast address-family routes)—maximum number of unicast address family routes. | ExtremeSwitching X460-G2 | 6,000 |
ExtremeSwitching X590, X465, X695 | 10,000 | |
ExtremeSwitching X450-G2 | 4,800 | |
BGPv6 (non-unique routes)—maximum number of non-unique BGP routes. | ExtremeSwitching X460-G2 | 18,000 |
ExtremeSwitching X590, X465, X695 | 24,000 | |
ExtremeSwitching X450-G2 | 14,000 | |
EVPN EVI instances—maximum number of EVI instances. | ExtremeSwitching X590, X465, X695 | 1,024 |
EVPN LAGs—maximum number of LAGs. | ExtremeSwitching X590, X465, X695 | 128 |
GRE Tunnels—maximum number of GRE tunnels. | ExtremeSwitching X460-G2, X450-G2, X590, X465, X695 | 255 |
ExtremeSwitching X620, X440-G2 | N/A | |
IS-IS adjacencies—maximum number of supported IS-IS adjacencies. | ExtremeSwitching X460-G2, X590, X465, X695 | 128 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS ECMP—maximum number of equal cost paths per multipath for IS-IS. | ExtremeSwitching X460-G2, X590, X465, X695 | 2, 4, or 8 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS interfaces—maximum number of interfaces that can support IS-IS. | ExtremeSwitching X460-G2, X590, X465, X695 | 255 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS routers in an area—recommended maximum number of IS-IS routers in an area. | ExtremeSwitching X460-G2, X590, X465, X695 | 256 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS route origination—recommended maximum number of routes that can be originated by an IS-IS node. | ExtremeSwitching X460-G2, X590, X465, X695 | 20,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4 L1 routes in an L1 router—recommended maximum number of IS-IS Level 1 routes in a Level 1 IS-IS router. | ExtremeSwitching X460-G2, X590, X465, X695 | 25,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4 L2 routes—recommended maximum number of IS-IS Level 2 routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 25,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4 L1 routes in an L1/L2 router—recommended maximum number of IS-IS Level 1 routes in an L1/L2 IS-IS router. | ExtremeSwitching X460-G2, X590, X465, X695 | 20,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv6 L1 routes in an L1 router—recommended maximum number of IS-IS Level 1 routes in a Level 1 IS-IS router. | ExtremeSwitching X460-G2, X590, X465, X695 | 10,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv6 L2 routes—recommended maximum number of IS-IS Level 2 routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 10,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv6 L1 routes in an L1/L2 router—recommended maximum number of IS-IS Level 1 routes in a L1/l2 router. | ExtremeSwitching X460-G2, X590, X465, X695 | 10,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4/IPv6 L1 routes in an L1 router—recommended maximum number of IS-IS Level 1 routes in a Level 1 IS-IS router. The numbers documented are based on 50% IPv4 routes and 50% IPv6 routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 20,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4/IPv6 L2 routes in an L2 router—recommended maximum number of IS-IS Level 2 routes in a Level 2 IS-IS router. The numbers documented are based on 50% IPv4 routes and 50% IPv6 routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 20,000 |
ExtremeSwitching X450-G2 | N/A | |
IS-IS IPv4/IPv6 L1 routes in an L1/L2 router—recommended maximum number of IS-IS Level 1 routes in a Level 1/Level2 IS-IS router. The numbers documented are based on 50% IPv4 routes and 50% IPv6 routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 20,000 |
ExtremeSwitching X450-G2 | N/A | |
MSDP active peers—maximum number of active MSDP peers. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 64 |
MSDP SA cache entries—maximum number of entries in SA cache. | ExtremeSwitching X590, X465, X695 | 14,000 |
ExtremeSwitching X450-G2 | 8,000 | |
ExtremeSwitching X460-G2 | 10,000 | |
MSDP maximum mesh groups—maximum number of MSDP mesh groups. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 16 |
OSPFv2/v3 ECMP—maximum number of equal cost multipath OSPFv2 and OSPFv3. | ExtremeSwitching X460-G2, X450-G2, X590, X465, X695 | 64 |
OSPFv2 areas—as an ABR, how many OSPF areas are supported within the same switch. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 8 |
OSPFv2 external routes—recommended maximum number of external routes contained in an OSPF LSDB. | ExtremeSwitching X590, X465, X695 | 10,000 |
ExtremeSwitching X460-G2 | 5,000 | |
ExtremeSwitching X450-G2 | 4,000 | |
OSPFv2 inter- or intra-area routes—recommended maximum number of inter- or intra-area routes contained in an OSPF LSDB with one ABR in OSPF domain. | ExtremeSwitching X590, X465, X695 | 4,000 |
ExtremeSwitching X460-G2 | 2,000 | |
ExtremeSwitching X450-G2 | 1,600 | |
OSPFv2 interfaces—recommended maximum number of OSPF interfaces on a switch (active interfaces only). | ExtremeSwitching X460-G2, X590, X465, X695 | 400 |
ExtremeSwitching X450-G2 | 320 | |
OSPFv2 links—maximum number of links in the router LSA. | ExtremeSwitching X460-G2, X590, X465, X695 | 400 |
ExtremeSwitching X450-G2 | 320 | |
OSPFv2 neighbors—maximum number of supported OSPF adjacencies. | ExtremeSwitching X460-G2, X590, X465, X695 | 128 |
ExtremeSwitching X450-G2 | 96 | |
OSPFv2 routers in a single area—recommended maximum number of routers in a single OSPF area. | ExtremeSwitching X590, X465, X695 | 100 |
ExtremeSwitching X460-G2 | 50 | |
ExtremeSwitching X450-G2 | 40 | |
OSPFv2 virtual links—maximum number of supported OSPF virtual links. | ExtremeSwitching X460-G2, X590, X465, X695 | 32 |
ExtremeSwitching X450-G2 | 25 | |
OSPFv3 areas—as an ABR, the maximum number of supported OSPFv3 areas. | ExtremeSwitching X590, X465, X695 | 100 |
ExtremeSwitching X460-G2 | 16 | |
ExtremeSwitching X450-G2 | 12 | |
OSPFv3 external routes—recommended maximum number of external routes. | ExtremeSwitching X460-G2, X590, X465, X695 | 10,000 |
ExtremeSwitching X450-G2 | 7,500 | |
OSPFv3 inter- or intra-area routes—recommended maximum number of inter- or intra-area routes. | ExtremeSwitching X590, X465, X695 | 4.000 |
ExtremeSwitching X460-G2 | 3,000 | |
ExtremeSwitching X450-G2 | 500 | |
OSPFv3 interfaces—maximum number of OSPFv3 interfaces (active interfaces only). | ExtremeSwitching X460-G2, X590, X465, X695 | 256 |
ExtremeSwitching X450-G2 | 192 | |
OSPFv3 neighbors—maximum number of OSPFv3 neighbors. | ExtremeSwitching X460-G2, X590, X465, X695 | 64 |
ExtremeSwitching X450-G2 | 48 | |
OSPFv3 virtual links—maximum number of OSPFv3 virtual links supported. | ExtremeSwitching X460-G2, X590, X465, X695 | 16 |
ExtremeSwitching X450-G2 | 12 | |
PIM IPv4 (maximum interfaces)—maximum number of PIM active interfaces. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 255 |
PIM IPv4 Limits—maximum number of multicast groups per dynamic rendezvous point. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 180 |
PIM IPv4 Limits—maximum number of multicast groups per static rendezvous point. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 3,000 (depends on policy file limits) |
PIM IPv4 Limits—maximum number of multicast sources per group. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 5,000 |
PIM IPv4 Limits—maximum number of dynamic rendezvous points per multicast group. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 145 |
PIM IPv4 Limits—static rendezvous points. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 32 |
PIM IPv6 (maximum interfaces)—maximum number of PIM active interfaces. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 255 |
PIM IPv6 Limits—maximum number of multicast sources per group. | ExtremeSwitching X460-G2, X590, X465, X695 | 1,750 |
ExtremeSwitching X450-G2 | 1,500 | |
PIM IPv6 Limits—maximum number of multicast groups per dynamic rendezvous point. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 |
70 |
PIM IPv6 Limits—maximum number of multicast groups per static rendezvous point. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 |
3,000 (depends on policy file limits) |
PIM IPv6 Limits—maximum number of dynamic rendezvous points per multicast group. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 64 |
PIM IPv6 Limits—maximum number of secondary addresses per interface. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 70 |
PIM IPv6 Limits—static rendezvous points. | ExtremeSwitching X450-G2, X460-G2, X590, X465, X695 | 32 |