The following issues were resolved in Switch Engine 32.7.1-Patch1-26. Version 32.7.1-Patch1-26 includes all fixes up to and including versions 31.6, 31.7, 32.1, 32.2, 32.3, 32.4, 32.5, 32.6.x, and 32.7.x.
| Defect Number | Description |
|---|---|
| General | |
| CFD-11320 | Multicast delay occurs in MLAG test setup. |
| CFD-11394 | Memory leak OCCURS in SNMPD process due to failed requests. |
| CFD-11450 | When DHCP-Snooping is configured only on a PVLAN edge-port, DHCP bindings are not populated properly. |
| CFD-11454 | Process VLAN crashes with signal 6 leading to a switch restart. |
| CFD-11465 | Port ID is incorrectly displayed when we poll the dot1d port table. |
| CFD-11468 | Policy is disabled after switch restarts. |
| CFD-11491 | Configuration wrongly displays all events are deleted in default filter when a particular event is excluded. |
| CFD-11625 | Unable to enforce policy profile from ExtremeCloud IQ-SE when the profile has cos options enabled. |
| CFD-11692 | ELRP wrongly detects a loop when both the tenant VLAN and non-tenant VLAN are present in the ISC port. |
| CFD-11700 | Scheduled restart is not working as scheduled when the SNTP-client updates the switch time dynamically. |
| CFD-11753 | A few IpsystemStatsTable entries are always zero. |
| CFD-11786 | In an ExtremeXOS stack, console access to TPVM fails. |
| EXOS-36221 | Process VLAN crashes with signal 6 leading to a switch restart. |
| EXOS-36378 | Process snmpMaster crashes with signal 6 causing a switch restart. |
| 5320 Series | |
| CFD-11893 | SNMP memory leak occurs after polling. |
| 5520 Series | |
| CFD-11446 | The 10070H optic port on a 5520-48SE series switch did not activate after reinserting while the port speed was configured as 100Mbps. |