debug ipv6 mld
Enables IPv6 MLD debug flags.
Syntax
debug ipv6 mld
{
errors
|
group
|
interface
|
l2-port
|
packet
|
rx
|
tx
|
vlan
|
all
}
no debug ipv6 mld
{
errors
|
group
|
interface
|
l2-port
|
packet
|
rx
|tx
|
vlan
|
all
}
Command Default
By default, all debug flags are
disabled.
Parameters
-
errors
- Controls the error change flag.
-
group
- Controls the multicast group processing
flag.
-
interface
- Controls the interface processing flag.
-
l2-port
- Controls the Layer 2 port processing flag.
-
packet
- Controls the packet processing flag.
-
rx
- Controls the packet received processing
flag.
-
tx
- Controls the packet transmitted processing
flag.
-
vlan
- Controls the VLAN interface processing flag.
-
all
- Controls the state of all the
flags.
Modes
Privileged EXEC mode
Usage Guidelines
Diagnostic commands are developed and intended
for specialized troubleshooting. Work closely with Extreme Networks technical
support when running debug or show
system internal commands and interpreting their results.
The no debug ipv6 mld all
form of the command disables all debug flags.
Examples
The following example shows the syntax for enabling all debug flags.
device# debug ipv6 mld all
The following example shows the syntax for disabling the interface flag.
device# no debug ipv6 mld interface
