rmon alarm
Sets the RMON alarm conditions.
Syntax
rmon alarm
index
snmp_oid
interval
seconds
[
absolute
|
delta
]
rising-threshold
value
event
number
[
falling-threshold
value
event
number
[
owner
name
]
Command Default
No alarms are configured.
Parameters
-
index
- Specifies the RMON alarm index. Valid values range from 1 through 65535.
-
snmp_oid
- Specifies the MIB object to monitor. The variable must be in the SNMP OID format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a counter32.
-
interval
seconds
- Specifies the RMON alarm sample interval in seconds. Valid values range from 1 through 2147483648.
-
absolute
- Sets the sample type as absolute.
-
delta
- Sets the sample type as delta.
- rising-threshold
value
- Specifies the RMON alarm rising threshold. Valid values range from 0 through 4294967295.
- event
number
- Specifies the event for the rising alarm. Valid values range from 1 through 65535.
- falling-threshold
value
- Specifies the RMON alarm falling threshold. Valid values range from 0 through 4294967295.
- event
number
- Specifies the event for the rising alarm. Valid values range from 1 through 65535.
- owner
name
- Specifies the identity of the owner. The maximum number of characters is 32.
Modes
Global configuration mode
Usage Guidelines
Enter
no rmon alarm to disable the alarm conditions.
Examples
To set RMON alarm conditions:
device# configure terminal
device(config)# rmon alarm 100 1.3.6.1.2.1.16.1.1.1.5.65535 interval 5 absolute rising-threshold 10000 event 100 falling-threshold 1000 event 101 owner admin
