Extreme SLX-OS Software Upgrade Guide, 20.6.1

Switch to the Linux shell from the SLX-OS CLI.

SLX# start-shell

Enter the Linux admin user shell.

[admUser@SLX]# su
             password: <password>

The default password is "extreme".

Remove the existing TPVM package at the following path in the device's SLX-OS VM, at the Linux shell login prompt.

[admUser@SLX]# rm -rf /tftpboot/SWBD2900/tpvm-3.0.0.amd64.deb

Using SCP or FTP, copy the new TPVM package that is compatible with the SLX-OS release from the release server, and copy it to the SLX-OS VM /tftpboot/SWBD2900/ folder.

Return to the SLX-OS CLI shell.

[root@SLX]# exit
[admUser@SLX]# exit

Stop TPVM if it is running.

SLX# tpvm stop

Uninstall existing TPVM firmware.

SLX# tpvm uninstall

Use tpvm deploy to configure the network and management settings, and install TPVM.

SLX# tpvm deploy mgmt ipaddr 10.25.101.121/22 gw 10.25.100.1 admin-pwd mypassword 
confirm mypassword 
Starting TPVM deploy CLI, please DO NOT hit CTRL+C
Tpvm install started
..Tpvm is installed
Tpvm set_ip succeeds
Tpvm password succeeds
auto-boot enable succeeds
Tpvm is started

Above is one example of using TPVM deploy. The following are additional examples.

Eth0 with DHCP and passwordless login
```
SLX# tpvm deploy mgmt dhcp allow-pwless
```
Eth1 with static IP, default gateway and passwordless login
```
SLX# tpvm deploy insight ipaddr 10.10.10.1/24 gw 10.10.10.100 allow-pwless
```

Eth1 with static IP, default gatway, passwordless login and new TPVM password setup

SLX# tpvm deploy insight ipaddr 10.10.10.1/24 gw 10.10.10.100 allow-pwless admin-pwd admin123 confirm-pwd admin123

Eth0 with static IP, default gateway, passwordless login and new TPVM password setup

SLX# tpvm deploy mgmt ipaddr 10.10.10.1/24 gw 10.10.10.100 allow-pwless admin-pwd admin123 confirm-pwd admin123

Eth1 with Static IP, default gateway

SLX# tpvm deploy insight ipaddr 10.10.10.1/24 gw 10.10.10.100

Installing TPVM Using tpvm deploy