Update ONIE

Sometimes it is required that the ONIE, ONIE-GRUB, and DIAG be updated to the latest available versions. Use the update onie command from the SLXOS CLI to update the above. The SLXOS device will reboot thrice during this upgrade process.

Note

This action is only available for SLX 9150, SLX 9250, Extreme 8520, and Extreme 8720 devices.

From the Privileged EXEC Mode prompt execute the update onie command and provide the appropriate parameters.

SLX# update onie sftp host 10.10.10.23 user ftpuser password password directory /home/ftpuser/binaries/ filename onie-updater-x86_64-quanta_dnv-r0-14-ix8t_3abca

Warning

The ONIE upgrade will be aborted if the ONIE file download fails.

The upgrade process will download the file and then reboot the device for its first of three reboots.

After booting into to the ONIE: Rescue mode, the ONIE update process will automatically install ONIE and DIAG. On successful completion of this step, the upgrade process reboots the device for its second of three reboots.

Post the second reboot, ONIE-GRUB is installed and the SLXOS device is rebooted a final time.