Use this module to enable VRRPv3 globally, and to configure and enable VRRPv3 on specific interfaces to share workload and provide router redundancy.
module: brocade-vrrpv3 +--rw vrrp-global +--rw vrrp-acceptmode-disable? empty
module: brocade-interface +--rw vrrpv3:vrrpv3-group [vrid] | | | | +--rw vrrpv3:vrid vrid-type | | | | +--rw vrrpv3:use-v2-checksum? empty | | | | +--rw vrrpv3:virtual-ip [virtual-ipaddr] | | | | | +--rw vrrpv3:virtual-ipaddr inet:ipv6-address | | | | +--rw vrrpv3:track | | | | | +--rw vrrpv3:interface [interface-type interface-name] | | | | | +--rw vrrpv3:interface-type track-iftype | | | | | +--rw vrrpv3:interface-name track-ifname | | | | | +--rw vrrpv3:track-priority? uint8 | | | | +--rw vrrpv3:advertisement-interval? uint32 | | | | +--rw vrrpv3:enable? empty | | | | +--rw vrrpv3:hold-time? uint32 | | | | +--rw vrrpv3:preempt-mode? empty | | | | +--rw vrrpv3:priority? uint8 | | | | +--rw vrrpv3:description? string | | | +--rw vrrpv3:vrrpv3e-group [vrid] | | | +--rw vrrpv3:vrid vrrpe-vrid-type | | | +--rw vrrpv3:virtual-ip [virtual-ipaddr] | | | | +--rw vrrpv3:virtual-ipaddr inet:ipv6-address | | | +--rw vrrpv3:track | | | | +--rw vrrpv3:interface [interface-type interface-name] | | | | +--rw vrrpv3:interface-type track-iftype | | | | +--rw vrrpv3:interface-name track-ifname | | | | +--rw vrrpv3:track-priority? uint8 | | | +--rw vrrpv3:enable? empty | | | +--rw vrrpv3:hold-time? uint32 | | | +--rw vrrpv3:preempt-mode? empty | | | +--rw vrrpv3:priority? uint8 | | | +--rw vrrpv3:description? string | | | +--rw vrrpv3:advertise-backup? empty | | | +--rw vrrpv3:nd-advertisement-timer? uint32 | | | +--rw vrrpv3:advertisement-interval-scale? uint32 | | | +--rw vrrpv3:backup-advertisement-interval? uint32 | | | +--rw vrrpv3:vrrpe-advertisement-interval? uint32 | | | +--rw vrrpv3:short-path-forwarding | | | +--rw vrrpv3:basic? empty | | | +--rw vrrpv3:revert-priority? uint8