brocade-diagnostics

This data model enables or disables power-on self-test (POST) and actions to initiate the tests listed in Diagnostic actions.

Table 1. Diagnostic actions
Action	Purpose
burninerrclear	Clears the errors that are stored in the nonvolatile storage on the slot during the burn-in process.
clearerror	Clears the diagnostics failure status.
portledtest	Runs various action modes on the port LEDs and validates the functionality.
portloopbacktest	Sends frames between various ASICs on the switch and validates the ASIC functionality.
post	Performs power-on self-test.
prbstest	Performs pseudo-random binary-sequence tests.
setcycle	Configures all the parameters required for the system verification test.
setdbg	Changes the debug level.
systemverification	Runs a combination of various hardware diagnostic tests.
turboramtest	Performs a turbo static RAM (SRAM) test of the ASIC chips.

Top-level container

 module: brocade-diagnostics
   +--rw diag
      +---x diag-install    
         +--ro output    
            +--ro diag-install-msg?   string