The switch operating system software supports stacking and static routing. The switch operating system software does not support:
The following features are supported:
| EDP | Link Fault Signaling | IPv4 –L2 unicast and multicast switching |
| Fabric Attach | ELSM | IPv4 Directed broadcast |
| Identity Management | ACLs | IPv6 – L2 unicast switching |
| LLDP | CPU Dos Protect | IPv4 and IPv6 Nettools |
| VLANs ( except Protocol based VLANs) | SNMPv3 | IPv4 – Unicast and multicast routing – static routes |
| Jumbo Frames | SSH2 – Server & Client | IPv4 DAD |
| QoS – egress Shaping | RADIUS | IPv6 Unicast routing – static routes |
| LAG | Network login | IPv6 DAD |
| Software Redundant Port | IP Security | PBR for IPv4 |
| STP ( dot1d , dot1s , dot1w) | Static IGMP | PBR for IPv6 |
| sFLow | Static MLD | Python script Execution |
| CLEAR flow | IGMP v1/v2/v3 snooping | Node Alias |
| CLI scripting | UDP forwarding | All Show commands |
| Web based Device management | UDP BOOTP Relay forwarding | All Debug commands |
| CEP detection | Mulitcast VLAN registration | Switch operational commands ( cp / rm / mv) |
| DHCP v4 | MVRP – VLAN Topo management | Switch Management ( SSH / SNMP ) |
| DHCP v6 | CFM | VLAN Aggreggation |
| User VRs and VRFs | Y.1731 | Multinetting for forwarding |