mac-name
Configures a relevant name for each MAC address. Use this
command to associate client names to specific connected client MAC addresses for improved
client management.
Supported on the following devices:
- Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502,
AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP763, AP7662, AP8163, AP8543,
AP8533.
- Service Platforms:
NX5500, NX7500, NX9500, NX9600
- Virtual Platforms: CX9000, VX9000
Syntax
mac-name <MAC> <NAME>
Parameters
mac-name <MAC> <NAME>
| mac-name <MAC> <NAME> |
Assigns a user-friendly name to this RF Domain‘s
member access point‘s connected client to assist in its easy recognition
- <MAC> – Specify the MAC address
- <NAME> – Specify the client name for the specified MAC
address. The name specified here will be used in events and
statistics.
|
Examples
nx9500-6C8809(config-rf-domain-default)#mac-name 11-22-33-44-55-66 TestDevice
nx9500-6C8809(config-rf-domain-default)#show context
rf-domain default
location SanJose
contact Bob+14082778691
country-code us
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
mac-name 11-22-33-44-55-66 TestDevice
layout area Ecospace floor Floor1 map-location www.firstfloor.com units meters
control-vlan 1
nx9500-6C8809(config-rf-domain-default)#
