show auto-provision

show auto-provision {{vr} vr_name}

Description

Displays the current state of auto provision on the switch.

Syntax Description

vr_name Specifies the virtual router. This may be VR-Default or VR-Mgmt only

Default

N/A.

Usage Guidelines

Use this command to display the current state and the statistics of the auto provision feature on the switch.

Example

The following command displays all information on the current state of auto provision:

show auto-provision

Following is sample output for the command when the auto provision is enabled. When “Enabled” the feature can be “In progress”, “Done”, or “Failed.”

(Auto-Provision) switch # show auto-provision
---------------------------------------------------------------------------
VR-Name     Auto-Provision Status  Number of attempts
---------------------------------------------------------------------------
VR-Default  Enabled (In progress)  2
VR-Mgmt     Enabled (In progress)  1
switch # show auto-provision
---------------------------------------------------------------------------
VR-Name     Auto-Provision Status  Number of attempts
---------------------------------------------------------------------------
VR-Default  Enabled (Done)         0
VR-Mgmt     Enabled (Done)         0

The following command displays information on the current state of auto provision on VR-Mgmt.

show auto-provision vr "VR-Mgmt"

Following is sample output for the command when auto provision is disabled:

switch # show auto-provision vr "VR-Mgmt"
DHCP Auto-Provision       : Disabled
Number of attempts        : 0

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.