configure eaps fast-convergence

configure eaps fast-convergence[off | on]

Description

Enables EAPS to converge more quickly.

Syntax Description

off Turns fast-convergence off. Default is off.
on Turns fast-convergence on.

Default

Default is off.

Usage Guidelines

This command acts on the switch, not per domain.

In certain environments to keep packet loss to a minimum when the ring is broken, configure EAPS with fast-convergence turned on. If fast convergence is turned on, you can view the configuration with the show eaps command.

Note

Note

If fast-convergence is turned on, the link filters on all EAPS ring ports are turned off. This can result problems if the port‘s hardware encountered a problem and started “flapping” between link-up/link-down states.

Example

The following command configures fast convergence for all of the EAPS domains on the switch:

configure eapsfast-convergence on

History

This command was first available in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, and 5520 series switches.