enable network-clock ptp unicast-negotiation

enable network-clock ptp [boundary | ordinary] unicast-negotiation {vlan} vlan_name]

Description

Enable unicast negotiation property in the specified clock port. The unicast negotiation enabled clock port responds to the unicast signaling requests from other clock slaves.

Syntax Description

boundary Boundary clock.
ordinary Ordinary clock.
vlan_name This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5320, 5420, 5520 series switches. name.

Default

N/A.

Usage Guidelines

The unicast negotiation feature is currently not supported, and this command is retained to provide configuration compatibility to previous releases.

Example

Example output not yet available and will be provided in a future release.

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the ExtremeSwitching X460-G2, X670-G2 series switches.

Note

Note

PTP commands can be used only with the Network Timing feature pack.