The AP4020 comes with the AH-ACC-BKT-AX-TB mounting bracket that can be used to mount the access point on flat t-bar ceiling grids and flat surfaces, such as Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (flat bottomed 9/16 in. ceiling grid), and walls. The ceiling tile sides must be flat without a step on the edges.
| Item | Description |
|---|---|
| AH-ACC-BKT-AX-TB |
Mounting bracket that can be used to mount the access point on flat surfaces such as Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (flat bottomed 9/16 in. ceiling grid), and walls. Note: AH-ACC-BKT-AX-TB is included with the access point.
|
|
AH-ACC-BKT-AX-IL |
Mounting bracket for Interlude ceilings (9/16 in. wide T-bar with center protrusion and has less than 1/4 inch between the wall and the access point). |
|
AH-ACC-BKT-AX-SL |
Mounting bracket for Silhouette ceilings (ceiling grid with 1/8 in. or 1/4 in. bottom opening). |
|
AH-ACC-BKT-AX-WL |
Mounting bracket for direct-to-wall installations when a 1.25 in. of space is desired between the wall and the access point. |
| ACC-BKT-TB-NF | Mounting bracket for 15/16 in. wide T-bars with sculpted ceiling tiles. |
| AH-ACC-BKT-916-KIT | Mounting bracket for 9/16 in. wide T-bars with sculpted ceiling tiles. |
| ACC-BKT-AX-BEAM |
Mounting bracket for beam mounting. |
|
ACC-BKT-AX-JB |
Mounting bracket for junction box or wall mounting. |
| ACC-BKT-AX-WNGADAPT | Adapter bracket for Cloud AP to WiNG Mounting Plate (#37201). Ships in a pack of 10. |
| ACC-BKT-AX-TBW | Mounting bracket for 1.5 in wide extruded T-Bars with flat ceiling tiles. |
You can power the access point through the ETH0 RJ45 Ethernet port. But if you need to power the AP with an external power supply, you can purchase a 12V DC power supply.
| Part number | Description |
|---|---|
| 37219 | PWR 12V DC, 3A, 2.5mm x 5.5mm connector |
The following table shows the additional accessories available for your access point.
For more information, see the 802.11ax and Cloud Access Points Accessories Guide.
| Part number | Description |
|---|---|
|
ACC-WIFI-MICRO-USB |
Extreme Networks micro USB cable.
Note: The console port can only be used with the Extreme Networks console cable. You could damage the AP if you use another cable.
Note: When you connect to the Micro USB console port, the management
station from which you connect to the device must have a VT100 emulation program,
such as TeraTerm Pro (a free terminal emulator) or Hilgraeve HyperTerminal (provided
with Windows operating systems from XP forward).
|