mac-security limit-learning

Syntax

• default mac-security limit-learning [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] enable

• default mac-security limit-learning [port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}] max-addrs

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning enable

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

• default mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} max-addrs

• mac-security limit-learning enable

• mac-security limit-learning {port {slot/port[/sub-port][-slot/port[/sub-port]][,...]}} max-addrs <1-64000>

• no mac-security limit-learning

• no mac-security limit-learning enable

• no mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning

• no mac-security port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} limit-learning enable

Command Parameters

enable

Limits the MAC learning for the port.

limit-learning max-addrs <1-64000>

Specifies the maximum number of MAC addresses to learn. The default is 1024.

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration