Configuring the B03 Branch Office appliance
B03 is connected to the Data Center through one tunnel over the MPLS private network.
Identifying the appliance
After the B03 appliance with the 'SN123445' Serial Number (and its Model/Version information) has been automatically provisioned in the SD-WAN Orchestrator from the ZTP Server, as indicated via the 
sign, it appears under the 'Not Configured' tab of the Network -> Configuration window.
Refer to the procedure described in "Configuring the B01 Branch Office appliance" to identify the appliance as follows:
Configuring the LAN
As a second step, configure the B03 appliance LAN which includes one physical interface. Refer to "Use Case 2" diagram (LAN information is displayed in blue) and to the procedure describing B01 appliance LAN configuration to define the following parameters. Do not specify any VRRP settings.
Configuring the WAN
As a third step, configure the WAN linked to the B03 appliance: MPLS. Refer to "Use Case 2" diagram where WAN1 (MPLS) details are displayed in green. Also refer to the configuration procedure of B02 appliance WAN2 to define the following parameters:
Also see how to configure:
a multi-appliance Branch Office Site
traffic redirection to an external gateway
traffic redirection to a web security gateway
traffic redirection to a cloud gateway