Configure Tunnel Policies

Add the Tunnel Concentrators and configure the Tunnel Concentrator services.

Use the following steps to add a new tunnel policy to support Layer 2 roaming with Tunnel Concentrator. Alternately, you can skip this step and create a user policy with Traffic Tunneling (GRE) to Tunnel Concentrator. See Configure a User Profile for Traffic Tunneling.

Use the following steps to add a new tunnel policy to support Layer 2 roaming with Tunnel Concentrator. Alternately, you can skip this step and create a user policy with Traffic Tunneling (GRE) to Tunnel Concentrator.

  1. Log in to ExtremeCloud‌ IQ.
  2. Go to Configure > Common Objects > Network > Tunnel Policies.
  3. Select the plus sign.
  4. Enter a name for this policy.
  5. Enter an optional description for the policy.
    Although optional, descriptions can be helpful when you are troubleshooting your network.
  6. Select Tunnel Concentrator and then select the Tunnel Destination from the drop-down list.
    You can add a new Tunnel Concentrator service by selecting Add, or select Edit for an existing instance. For more information, see Configure Tunnel Concentrator Services.
  7. Select Save.

    The Tunnel Policies table displays the following information for the configured tunnel policies in your network:

    • Name: The name of the tunnel policy.
    • Description: An optional description of the policy.
    • Used by: The number of network policies to which the tunnel policy is applied. Hover over a number in this column to see the names of the network policies.
9038930-00 Rev. AA