When you select the host name of an AP from the Devices list and then select
, the following information is displayed (APs only):
- At the top of the main
section, CPU Usage, Memory Usage, MAC Table Utilization, Last Seen time,
Temperature, Power Supply Status, Fan Status, IP Address, MAC Address,
Software Version, Device Model, Serial Number, Make, and IQAgent Version are
all listed.
- The graphic below shows all
of the ports on the device. Selecting a port displays more information.
- Within the VLAN tab are the
VLAN Name, VLAN ID, Active Ports (Enabled port with VLAN assigned), STP
Instance, IGMP Snooping, and DHCP Snooping information columns. Selecting a
VLAN within the VLAN tab highlights the ports that are currently
assigned.
- Within the IPv4
tab the VLAN Name, VLAN ID, IPv4 Forwarding, Routing Instance, and IP
Address / Subnet information columns are displayed. The VLAN can be selected
when the row is highlighted. Ports using the VLAN, both tagged and untagged
that are actively provisioned, light up to indicate ports using the VLAN.
Select a port to display the port name, port status, VLAN untagged/tagged
status, and port actions.