Configure VLAN Settings

Create a user profile that will use these VLAN settings. See Add a User Profile.

This task is part of configuring an SSID. Use this task to configure VLAN settings.

  1. Go to Configure > Network Policies.
  2. Select an existing network policy and then select Edit, or select Add.
  3. Select the Wireless tab.
  4. Select an existing SSID and then select Edit, or select Add.
  5. Scroll to User Access Settings and select the Default User Profile.
    • To use the default profile, select the link and configure the settings.
    • To assign a VLAN group to this profile, select Select and choose an existing VLAN group from the menu.

      Select Edit to make changes to the selected VLAN group.

    • To create a new VLAN group, select Add.

    Typically, the default VLAN is 1. For more information about adding a new VLAN group, see Add a VLAN Group.

  6. Type a User Profile Name.
  7. Select VLAN or VLAN Group.
  8. Select Select and choose an existing VLAN object from the menu, or select Add.
    To edit an existing VLAN object, select it and then select Edit.
  9. Type a Name for the new VLAN object.
  10. Type a VLAN ID for the new VLAN object.
  11. Select the Apply VLAN to devices for classification check box to create VLANs that you can apply to specific devices based on their location.
  12. Select Add.
  13. Enter the new VLAN ID, and then select Add to add the it to the VLAN table.
  14. Under Classification Rules in the VLAN table, select an existing classification rule, or select the add icon to add a new rule.
    See Configure a Classification Rules Network Policy for more information.
  15. Select Link.
  16. Enter a name for the classification rule.

    For easier tracking, you might want to add the locations and device models using this VLAN classification rule (for example, VLAN-AP230-Sunnyvale).

  17. Enter an optional description.
  18. Select the plus sign to choose the device location.
  19. Assign your VLAN profile based on the location of managed devices.
    Note

    Note

    When selecting a location, drill down to the level where the devices are located. For example, if the devices are located on the floor of a building, select that specific floor.
  20. Choose Select.
  21. Select SAVE VLAN.

Complete the user profile configuration.

9039022-00 Rev AA