To use the supplemental CLI (sCLI) tool, first navigate to Global Settings > VIQ
Management, and enable Supplemental CLI.
Use this task to update CLI commands to multiple devices simultaneously from ExtremeCloud IQ. After
you save supplemental CLI objects containing CLI commands, you can update the
commands for devices automatically, each time you update the network policy.
To avoid an unnecessary system reboot, select
Delta Configuration
Update. ExtremeCloud IQ attempts to update only the configuration deltas. If a
full update is required, the system prompts you to select Complete
Configuration Update. Examples of CLI commands that require a full
configuration update are: system antenna-type and system environment.
-
Go to .
-
Select existing supplemental CLI
objects using the drop-down list next to Re-use Supplemental CLI
Settings.
-
To add a new supplemental CLI
object, select
.
To edit an existing CLI object, select the corresponding check box and then
select
.
-
Type a Name.
-
Type an optional Description.
-
Type or paste the CLI commands into the field.
- Enter multiple CLI
commands, one command per line, not exceeding a maximum total of 8192
characters.
- Use CLI Commands that
contain IP and VLAN objects: ${ip:ip_object_name} and ${vlan:vlan_object_name}.
- Perform a complete
configuration update each time commands are appended to device
configurations.
- For Dell EMC switches,
enter the CLI commands,
enable, and
config in the beginning of a sequence of CLI
commands.
-
Select SAVE.
