Routing

Device Details for Routing

When you select the host name of an AP from the Devices list and then select Monitor > Monitoring > Routing, the following information is displayed (APs only):
  • The Route Monitor Polling Graph shows:
    • A time range showing total number of routes within a 24 hour time period.
    • Route type counts:
      • Direct Routes
      • Static Routes
      • OSPF Routes
      • Total Routes
    • The Y axis resizes based on chosen routes.
    • The Y axis represents the total number of routes.
    • The X axis represents the poll time interval.
    • Hovering over the graph displays a summary of routes with the given timestamp.
    Note

    Note

    Select the graph heading to enable or disable the graph line view.
  • Within the IPv4 Routing Table section, the destination subnetwork, next hop, VLAN Name, VLAN ID, Route Origin, Status, Metric, Route Age, Route Type Priority, and Routing Instance information are all listed. You can filter for the Route Origin and Status.
    Note

    Note

    • Up to 100 IPv4 routes are visible within the table. For additional visibility, use an SSH proxy.
    • Switch Engine software version 32.6.2.68 or newer is required.
9039022-00 Rev AA