Configure Device-Specific Settings
ExtremeCloud IQ allows you to modify switch templates at the device level. Settings made
at this level () apply only to the device and override the template settings configured
in the network policy. If you undo the device-level settings, the device automatically
reverts back to the original network policy and device template configuration. To revert
to the settings in the network policy, use the Actions button
from the Device List. To configure settings at the network policy level, see Configure the Network Policy.
After you select a switch from the Device List, you can create or modify the following
for the specific device:
- Device
Configuration: edit device details such as the host name, the
description, the device function, IP addresses, and VLAN assignments. See Configure Devices.
- Port
Configuration: edit port types, STP, Storm, and PSE settings.
See Configure Device Ports.
- Device
Credentials (Switch Engine devices
only): assign or change network administrator credentials and administrator
assignments. See Configure Device Credentials.
- SSH:
temporarily enable SSH in order to troubleshoot the device. See Configure SSH.
