Configure a Switch Engine Device Switch Stack

About this task

A stack is two or more Switch Engine devices inserted into slots and cabled together. When onboarding stacks, you will see one entry for each slot when first adding serial numbers.

Use this task to configure a Switch Engine device switch stack. If you select a default template, you must copy it by saving it as a new template. This will carry all the settings in the default template and let you customize it as required.

Note: Do not to make any changes in the default template. Always create a copy and make changes to the cloned version.

Procedure

  1. If not already there, select Configure > Network Polices, the existing network policy, and the Device Template tab.
  2. To create a template based on an existing default template, use the Select icon to create a new template.
  3. In the new dialog box, scroll to an existing switch stack device template, for example, Switch Engine 5320-Series-Stack.
  4. Select Copy.
  5. Enter a name for this cloned copy.
  6. To create a brand new template not based on an existing default, select the add icon.
  7. Enter a name for the new template.
  8. Select Save.
    The new or cloned switch stack template displays on the network policy's Switch Template page.
  9. Select the template to display the Device Template configuration page.
  10. Refer to Configure a Device Template.
    Note

    Note

    Repeat the Device Template configuration steps for each device in the stack.
  11. Save the configuration.

Results

After the stack is configured and operational, all slots will consolidate into a single stack object in ExtremeCloud IQ. It can take up to 15 minutes for the slots to consolidate and for ExtremeCloud IQ to recognize all slots as online. You might see a red icon in ExtremeCloud IQ if slots are offline or have not yet onboarded.

What to do next

For any post-configuration switch stack issues, see Switch Stack Issues. Now that you have created the switch stack, you can automatically create more if they are configured exactly the same way. See Instantly Create a Switch Engine Device Stack.