ExtremeCloud IQ
Controller Smart RF
can ensure that the operating channel width does not conflict with radio band
compliance limitations. Your channel width selection is considered when determining
the optimum channel width, but it is not guaranteed.
ExtremeCloud IQ
Controller Smart RF uses data from the
Neighbor Report to determine the best channel width. If your selected channel width
is restricted by radio band compliance, Smart RF selects the next lower channel
width. The minimum width is 20 MHz.
Important
If the channel plan does not
include a channel width that meets compliance restrictions, the radio channel is
disabled.
Smart RF runs the assessment for best channel while considering your desired channel
width. The highest channel width (160 MHz) is selected by default for 5 GHz and 6
GHz radios. To allow Smart RF to determine the best possible channel width without
you providing a desired width, select 160 MHz and Smart RF will automatically reduce
the width as appropriate to configure the optimum width,
provided that the AP model
supports 160 MHz.
Note
Imported configurations previously set to Auto automatically convert to 160 MHz
and are reduced appropriately.
