Note
Generic BLE Scan is not supported on the AP3900 series access points.Field | Description |
---|---|
Name | Unique profile name. |
Function | Determines the purpose of the IoT profile. Select BLE Scan. |
Application | Determines application type based on the previously selected function BLE Scan. Select Generic. |
Scan | |
Interval (ms) | Determines how long to wait between scans. Valid values are: Min (100ms) and Max (10240ms). The default value is Min (100ms). |
Window (ms) | Determines how long to scan per channel. Valid values are Min (100ms) and Max (10240ms).Value must be less than Scan Interval value. Default value is 100ms. |
Filter | |
Unique Company Identifier | Identifier used to differentiate a large
group of related beacons. A company can have a network of beacons with the same Company
ID. Used for filtering data. If specified, the APs only forward beacons with matching values in the 2-byte field (bytes 6-7). A value of Any indicates that no filtering is applied. Look up Company IDs at https://www.bluetooth.com/specifications/assigned-numbers/company-identifiers/. |
Min RSSI [dBm] | This is the signal strength required to include the packet in the BLE report. Valid values: -10 to -100. Default value is -100. Data from beacons with an RSSI that is less than the Min RSSI configured value is filtered out. |
Destination | |
IP Address | IP address of the customer Application Server that receives the beacon report. |
Port | Destination Port on the customer Application Server that presents the beacon report. Best Practice: Verify that the server IP address and Port number specified in the Profile are open. |