Integrating EFA Hyper-V Service

To integrate your Microsoft Hyper-V hosts with the EFA Hyper-V service, you need to do the following steps.

  1. Create or modify your fabric as required.

  2. Create or modify your tenant information as required.

  3. Register your new Microsoft System Center Virtual Machine Manager (SCVMM) as a tenant of the fabric.

  4. Verify your integration.

Managing Microsoft Hyper-V Tenants

The primary task of managing your existing Microsoft Hyper-V hosts as tenants would be to update them periodically or when you add new devices to your network. Another task would be to delete these servers when not required.

Example Network

The following network diagram will be used throughout this section to explain the various configurations.

Click to expand in new window
Sample Network Diagram

This table lists the devices, their IP/Port information, and their role within the example network.

IP Address & Port Device & Role
10.24.85.111 Microsoft System Center Virtual Machine Manager
10.24.81.10 Microsoft Hyper-V Host #1
10.24.82.20 Microsoft Hyper-V Host #2
10.9.9.10 EFA Server
10.9.9.20 [0/10] Fabric Leaf Node #1. This node is connected to the Microsoft Hyper-V host with IP address 10.24.81.10 on port 10.
10.9.9.30 [0/10] Fabric Leaf Node #2. This node is connected to the Microsoft Hyper-V host with IP address 10.24.82.20 on port 10.