unconfigure network-clock sync-e

unconfigure network-clock sync-e [port port]

Description

Unconfigures synchronous Ethernet on a particular port to be a source 1 or source 2 for synchronizing clock.

source-1	Source 1 external input clock
source-2	Source 2 external input clock
port	port
port	100Mbps/1G port Copper/Fiber Ports

N/A.

Use this command to unconfigure SyncE on a particular port.

The following command unconfigures SyncE as a primary master on port 2:

unconfigure network-clock sync-e port 2

This command was first available in ExtremeXOS 15.1.

This command is available on only on the Summit X460-G2 series switches.

Published August 2019prev | next