show vpex ports ecp statistics

show vpex ports {port_list} ecp statistics

Description

Shows bridge port extender (BPE) Edge Control Protocol (ECP) counter information.

Syntax Description

vpex	Specifies Virtual Port Extender (VPEX).
ports	Specifies the cascade port attached to the BPE.
port_list	Specifies the cascade port attached to the BPE.
ecp	Edge Control Protocol.
statistics	Specifies showing ECP counter information.

Default

If you do not specify any ports, information for all cascade ports appears.

Example

The following example shows ECP counter information for BPEs attached to all cascade ports. In this case, there is only one attached BPE on cascade port 1:47:

# show vpex ports ecp statistics 
Port   RxPkt  RxAck  RxReq  RxSeq  TxPkt  TxAck  TxReq  TxSeq  RxErr  TxErr  
===========================================================================
1:47      52      0      0    590     52     26     26     26      0      0 
===========================================================================
Flags    : (*) Active,
           (!) Administratively disabled,
           (A) Auto-calculated timer value

History

This command was first available in ExtremeXOS 22.5.

Platform Availability

This command is available on the Summit X670-G2 and ExtremeSwitching X465, X690, X590 series switches.

Published August 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback