Extreme 9920 supports breakout configuration.
About this task
The breakout mode enables you to partition a high-speed
port into multiple low-speed ports to accommodate multiple data lanes at lower
bandwidths.
Procedure
-
Enter global configuration
mode.
device# configure terminal
-
Enter hardware configuration
mode.
device# (config)# hardware
device (config-hardware)#
-
Configure the required breakout
mode.
- 4x10g:
Partition a port into four 10G interfaces
- 4x25g:
Partition a port into four 25G interfaces
device (config-hardware)# breakout [ 4x10g | 4x25g ]
