|
|
|
72.75 lbs (33 kg), 4 empty power supply slots, no power supply filler panels, 8 empty interface module slots, no interface module filler panels, 5 empty fan slots, |
|
95.9 lbs (43.5 kg), 5 fans and 8 interface modules |
|
|
104.7 lbs (47.5 kg) |
Refer to the 9920 Data Sheet for up-to-date information.
The speed of the fan increases only when the temperature of the device increases. Fan speed is not dependent on any fan failures.
|
Fan Speed |
Fan Module RPM (typical) |
Power |
|
|---|---|---|---|
|
Inlet Fan |
Outlet Fan |
Typical |
|
|
Full (100%) |
17000 (typ) |
14500 (typ) |
12V*5.0A = 60.0W per module |
|
Low (50%) |
8500 (typ) |
7250 (typ) |
16.6W (per module) |
Refer to the 9920 Data Sheet for up-to-date information.
|
Power Supply |
Input Rating |
|---|---|
|
1600 W AC Power Supply: Part no. 9920-ACPWR-1600W-F 1600 W AC Power Supply (front-to-back airflow) |
100-120/200-240Vac, 50/60 Hz, 10A/8A max for each PSU |
|
1600 W DC Power Supply: Part no. 9920-DCPWR-1600W-F 1600 W DC Power Supply (front-to-back airflow) |
-48 to -60Vdc, 36A Max. for each PSU |
|
CPU/Memory |
|---|
|
12-core, x86 Skylake-D-2163 |
|
4 x 32GB DDR4 ECC memory |
|
32 GB SLC NAND Flash Memory |
|
32MB packet buffer per chip |
|
North American Safety of ITE |
UL 60950-1 UL 62368-1 CAN/CSA No. 22.2 62368-1-14 CAN/CSA 22.2 No. 60950-1-07 Complies with FCC 21CFR 1040.10 (US Laser Safety) CDRH Letter of Approval (US FDA Approval) |
|
European Safety of ITE |
EN 60825-1 Class 1 (Lasers Safety) EN 62368-1 2014/35/EU Low Voltage Directive |
|
International Safety of ITE |
IEC 62368-1 IEC 60950-1 GB 4943.1 CNS 14336-1 AS/NZS 60950-1 (Australia /New Zealand) |
|
Country-specific |
BSMI (Taiwan Safety) NRCS LOA (South Africa) CCC (China Safety) |
|
North America EMC for ITE |
FCC CFR 47 part 15 Class A (USA) ICES-003 Class A (Canada) |
|
European EMC standards |
EN 55032 Class A EN 55024 EN 55035 EN 61000-3-2:2014 (Harmonics) EN 61000-3-3:2013 (Flicker) ETSI EN 300 386 (EMC Telecommunications) 2014/30/EU EMC Directive EN 55011 Class A |
|
International EMC certifications |
CISPR 32: 2015, Class A (International Emissions) IEC 61000-4-2:2008 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A IEC 61000-4-3-4-3:2010 Radiated Immunity 10V/m, Criteria IEC 61000-4-4-4-4:2012 Transient Burst, 1 kV, Criteria A IEC 61000-4-5-4-5:2014 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A IEC 61000-4-6-4-6:2013 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A IEC 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C |
|
Country-specific |
VCCI Class A (Japan Emissions) |
|
EN/ETSI 300 386 EN 300 386 V2.1.1 (2016-07) (EMC Telecommunications) EN/ETSI 300 019 (Environmental for Telecommunications) MEF9 and MEF14 certified for EPL, EVPL, and ELAN |
|
IEEE 802.3ab 1000BASE-T IEEE 802.3z 1000BASE-X IEEE 802.3ae 10GBASE-X IEEE 802.3ba 40GBASE-X IEEE 802.3bz 2.5GBASE-T and 5GBASE-T (for X460-G2-16mp-32p-10GE4) IEEE 802.3at PoE Plus IEEE 802.3az (EEE) |
|
Environmental standards |
EN/ETSI 300 019-2-1 v2.1.2 (2000 - 2009) - Class 1.2 Storage EN/ETSI 300 019-2-2 v2.1.2 (1999 - 09) - Class 2.3 Transportation EN/ETSI 300 019-2-3 v2.1.2 (2003 - 04) - Class 3.1e Operational EN/ETSI 300 753 (1997-10) - Acoustic Noise ASTM D3580 Random Vibration Unpackaged 1.5G |
|
Operating conditions |
Temperature range: 0°C to 50°C (32°F to 122°F) Humidity: 5% to 95% relative humidity, non-condensing Altitude: 0 to 1,800 meters (5,905 feet) Operational shock (half sine): 30 m/s2 (3 G), 11 ms, 60 shocks Operational random vibration: 3 to 500 Hz at 1.5 G rms |
|
Storage & transportation conditions (packaged) |
Transportation temperature: -40°C to 70°C (-40°F to 158°F) Storage and transportation humidity: 5% to 95% relative humidity, non-condensing Packaged vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at 0.2 G Packaged random vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from 20 to 200 Hz 13 drops minimum on sides and corners at 18 inches (<50 kg box) |