clear mpls statistics

Clears the MPLS statistics.

Syntax

clear mpls statistics oam

clear mpls statistics { transit [ label label | ldp [ ip_addr | submask | label ] | rsvp label ] }

clear mpls statistics { tunnel [ destination ip_addr | index vif_index | ldp [ destination ip_addr | index vif_index ] | rsvp [ destination ip_addr | index vif_index | name name ] ] }

Parameters

oam

Clears the MPLS OAM statistics.

transit

Clears the MPLS transit statistics.

label label: Clears the MPLS transit statistics for the selected label.
ldp ip_addr: Clears the MPLS transit LDP statisticsfor the selected IP address.
rsvp: Clears the MPLS transit RSVP statistics .

tunnel

Clears the MPLS tunnel statistics.

destination destination: Clears the MPLS tunnel statistics for the selected tunnel destination.

index vif_index

Clears the MPLS tunnel statistics for the selected tunnel index.

ldp

Clears the MPLS tunnel LDP statistics.

destination destination: Clears the MPLS tunnel statistics for the selected tunnel destination.

index vif_index: Clears the MPLS tunnel statistics for the selected tunnel index.

rsvp

Clears the MPLS tunnel RSVP statistics.

destination destination: Clears the MPLS tunnel statistics for the selected tunnel destination.

index vif_index: Clears the MPLS tunnel statistics for the selected tunnel index.
name name: Clears the MPLS tunnel statistics for the selected named tunnel.

Modes

MPLS policy mode

Usage Guidelines

MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".

Examples

The following example clears the MPLS statistics.

device# configure
device(config)# router mpls
device(config-router-mpls)# policy
device(config-mpls-policy)# clear mpls statistics