Displays MPLS statistics.
Privileged EXEC mode
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The show mpls statistics command displays the following information:
| Output field | Description | 
|---|---|
| Name | Tunnel name. | 
| Intf | Interface tunnel name. | 
| Prot | Protection code: L-Local, R- RtrId | 
| Total Packets | Displays the total number of packets. | 
| Total Bytes | Displays the total number of bytes. | 
| Since Last Clear Packets | Displays the number of packets since last clear. | 
| Since Last Clear Bytes | Displays the number of bytes since the last clear. | 
| Rate Pkts/sec | Displays the packets per second rate. | 
| Rate Bytes/sec | Displays the bytes per second rate. | 
The following example shows the command using the tunnel option.
device# configure
device(config)# router mpls
device(config-router-mpls)# lsp t2
device(config-router-mpls-lsp-t2)# show mpls statistics tunnel
                    Total                 Since Last clear               Rate          
Name  Intf   Prot   Packets   Bytes       Packets   Bytes     Pkts/sec   Bytes/sec
t1    tnl0   R      2004      28175882    2004      28175882  6             93919
t2    tnl1   L      3101      40373763    3101      40373763  10            134579
 
	  
	  
		The following example shows the command using the tunnel rsvp option.
device# configure
device(config)# router mpls
device(config-router-mpls)# lsp t2
device(config-router-mpls-lsp-t2)# show mpls statistics tunnel rsvp
                    Total                  Since Last clear              Rate          
Name  Intf          Packets   Bytes        Packets  Bytes     Pkts/sec   Bytes/sec
t1    tnl0          2004      28175882     2004     28175882  6             93919
 
	  
	 
		The following example shows the command using the transit option.
device# configure
device(config)# router mpls
device(config-router-mpls)# lsp t2
device(config-router-mpls-lsp-t2)# show mpls statistics transit
                   Total                  Since Last clear               Rate          
IN Label   Prot    Packets   Bytes        Packets   Bytes     Pkts/sec   Bytes/sec
2048       R       2004      28175882     2004      28175882  6             93919
2050       L       3101      40373763     3101      40373763  10            134579
 
	  
	 
		The following example shows the command using the transit ldp option.
device# configure
device(config)# router mpls
device(config-router-mpls)# lsp t2
device(config-router-mpls-lsp-t2)# show mpls statistics transit ldp
                   Total                  Since Last clear               Rate          
IN Label           Packets   Bytes        Packets   Bytes     Pkts/sec   Bytes/sec
2050               3101      40373763     3101      40373763  10            134579