device# show ip pim settings Maximum mcache : 24576 Current Count : 0 Hello interval : 30 Neighbor timeout : 105 Join/Prune interval : 60 Inactivity interval : 180 Hardware drop enabled : 1 Prune wait interval : 3 Register Suppress Time : 60 Register Probe Time : 10 Register Stop Delay : 0 Register Suppress interval : 0 SSM Enabled : No SPT Threshold : 1 Route Precedence : uc-non-default uc-default none
device# show ip pim mcache 50.1.1.101 230.1.1.1 
IP Multicast Mcache Table
Entry Flags    : sm  - Sparse Mode, ssm - Source Specific Multicast
                 RPT - RPT Bit, SPT - SPT Bit, LSrc - Local Source
                 LRcv - Local Receiver, RegProbe - Register In Progress
                 RegSupp - Register Suppression Timer, Reg - Register Complete
                 needRte - Route Required for Src/RP
Interface Flags: IM - Immediate, IH - Inherited, WA - Won Assert
                 MJ - Membership Join, BR - Blocked RPT, BA - Blocked Assert
                 BF - Blocked Filter
Total entries in mcache: 8
1    (50.1.1.101, 230.1.1.1) in Ve 40, Uptime 00:03:29
     Sparse Mode, RPT=0 SPT=1 Reg=0 RegSupp=0 RegProbe=0 LSrc=0 LRcv=1
     upstream neighbor=40.1.1.3
     num_oifs = 2
           Ve 2(00:03:29/181) Flags: IM
           Ve 10(00:03:29/0) Flags: MJ
     Flags (0x400784d1)
         sm=1 ssm=0 needRte=0
				device# show ip pim traffic
Port      |HELLO  |JOIN  |PRUNE  |ASSERT |GRAFT/REGISTER |REGISTER-STOP |BSR-MSGS  |RPC-MSGS       
          |Rx     |Rx    |Rx     |Rx     |Rx             |Rx            |Rx        |Rx          
------------+---------+---------+---------+---------+---------+---------+---------+---------+
Ve10         54       0       0       0        0           0              0          0         
Lo 1         0        0       0       0        0           0              0          0         
device# show ip pim traffic
Port        |HELLO |JOIN  |PRUNE |ASSERT |GRAFT/REGISTER |REGISTER-STOP |BSR-MSGS |RPC-MSGS       
            | Tx   |Tx    | Tx   |Tx     |Tx             |Tx            
------------+---------+---------+---------+---------+---------+---------+---------+---------+---
Ve10         29        0     0        0         0            0             0         0           
Lo 1         28        0     0        0         0            0             0         0       
     
				device(config)# show ip pim neighbor
-----+--------+------------+--------+---+---------+---------+-----+----------+-----------+----
Port |PhyPort |Neighbor    |Holdtime|T  |PropDelay|Override |Age  |UpTime    |VRF        |Prio
     |        |            |sec     |Bit|msec     |msec     |sec  |          |           |    
-----+--------+------------+--------+---+---------+---------+-----+----------+-----------+----
v2     e0/1     2.1.1.2     105      1   500       3000      0     00:44:10   default-vrf  1    
v4     e0/2     4.1.1.2     105      1   500       3000      10    00:42:50   default-vrf  1    
v5     e0/1     5.1.1.2     105      1   500       3000      0     00:44:00   default-vrf  1    
v22    e0/1     22.1.1.1    105      1   500       3000      0     00:44:10   default-vrf  1    
Total Number of Neighbors : 4
				device# show ip pim bsr
PIMv2 Bootstrap information for Vrf Instance : default-vrf
------------------------------------------------------------------------------ 
  This system is the Elected BSR
  BSR address: 1.51.51.1. Hash Mask Length 32. Priority 255. 
  Next bootstrap message in 00:01:00 
  Configuration: 
    Candidate loopback 2 (Address 1.51.51.1). Hash Mask Length 32. Priority 255.
Next Candidate-RP-advertisment in 00:01:00 
  RP: 1.51.51.1
    group prefixes:
    224.0.0.0 / 4
  Candidate-RP-advertisement period: 60
				device# show ip pim rp-candidate
Next Candidate-RP-advertisement in 00:00:10
  RP: 207.95.7.1
    group prefixes:
    224.0.0.0 / 4
  Candidate-RP-advertisement period: 60