Display IPv6 PIM Snooping Information

You can run these show commands from any level of the CLI. For more information, see the Extreme SLX-OS Command Reference.

Display the snooping status on a VLAN or a bridge domain.

device# show ipv6 multicast snooping
Vlan id            : 100
MLD  snooping      : Enabled
PIM  snooping      : Enabled
MLD  Version       : MLDv1

Display the IPv6 multicast forwarding cache for a VLAN or a bridge domain.

show ipv6 multicast snooping mcache vlan 100
Flags : V1|V2 : MLD Receiver, P_G : PIM (*,G) Join, P_SG: PIM (S,G) Join
                BR : PIM Blocked RPT
 Vlan ID : 100
 -------------
1     (*, ff04:3000:4000::2 )  00:21:48    NumOIF: 1
        Outgoing Ports:
                eth0/14        Flags: 0x84 ( V1)  00:21:48/202s
2     (*, ff08:1001:2001::1 )  00:27:09    NumOIF: 1
        Outgoing Ports:
                eth0/14        Flags: 0x84 ( V1)  00:27:09/131s
3     (*, ff0e:1000:2000::1 )  00:27:09    NumOIF: 1
        Outgoing Ports:
                eth0/14        Flags: 0x84 ( V1)  00:27:09/131s