Enables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the VLAN from a BOOTP server.
| bootp | Enable BOOTP client. |
| ipv4 | IPv4 client. |
| dhcp | Enable DHCP client. |
| ipv6 | IPv6 client. |
| vlan | Specifies a VLAN name. |
| all | Specifies all VLANs. |
Disabled.
If IPv4/IPv6 keyword is not specified , ipv4 would be taken as default for the mentioned VLAN.
The following example enables the generation and processing of BOOTP packets on a VLAN named "accounting":
enable bootp vlan accounting
This command was first available in ExtremeXOS 10.1.
The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.
This command is available on all ExtremeSwitching Universal switches.