Configures delta-bandwidth value per traffic class per MSRP port.
| msrp | Multiple Stream Registration Protocol. |
| port_list | List of ports in the switch. |
| traffic-class | Traffic class. |
| A | Traffic class A. |
| B | Traffic class B. |
| delta-bandwidth | Delta-bandwidth percentage (range 0 to 100, default 75 for class A, 0 for class B). |
Class A: 75, Class B: 0.
The delta bandwidth configuration limits the amount of bandwidth that can be used by the given stream reservation class. Each class is allowed to use a maximum of its delta bandwidth plus the delta bandwidth configured for each of the higher classes. For example, if the delta bandwidth for classes A and B are configured to 10 and 10 respectively, class A streams can use up to 10 percent of the link bandwidth, and class B streams can us up to 20 percent of the link bandwidth. The sum of the class A and B delta bandwidth values must be less than 100 percent.
# configure msrp ports all traffic-class A delta-bandwidth 50 # configure msrp ports 1-5 traffic-class B delta-bandwidth 0
This command was first available in ExtremeXOS 15.3.
This command is available on platforms that support the AVB feature pack license and have it installed. For complete information about software licensing, including how to obtain and upgrade your license, and which platforms support the AVB feature, see the Switch Engine 32.6.3 Feature License Requirements document.