enable bootprelay ipv6

enable bootprelay {ipv4 | ipv6} {vlan vlan_name} | {vr vr_name} | all {vr vr_name}

Description

Enables BOOTP Relay v6. This can be done across the VR or on a per VLAN basis.

Syntax Description


bootprelay	BOOTP Relay service.
ipv4	DHCPv4 BOOTP Relay service.
ipv6	DHCPv6 BOOTP Relay service.
`vlan_name`	Specifies a VLAN name
vr	Uses a specific virtual router name.
`vr_name`	Specifies a virtual router name.
all	Enables all VLANs.

Default

IPv4.

Usage Guidelines

Use this command to enable BOOTP Relay across the VR or on a per VLAN basis.

Example

The following example displays IPv6 bootprelay information:

* switch #  show bootprelay ipv6
BOOTP Relay: DHCPv6 BOOTP Relay enabled on virtual router "VR-Default"    
    BOOTP Relay Servers : 2001:0db8:85a3:0000:0000:8a2e:0370:7334                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7335                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7336                         
                          2001:0db8:85a3:0000:0000:8a2e:0370:7337
VLAN "Default":     
   BOOTP Relay          : Disabled
VLAN "v1":    
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7338    
   Interface ID         : v1-12     
   Remote ID            :v1_remId
   Prefix Snooping      : Disabled
VLAN"v2":    
   BOOTP Relay          : Enabled    
   BOOTP Relay Servers  : 2001:0db8:85a3:0000:0000:8a2e:0370:7339    
   Interface ID         : 100 (Default)     
   Remote ID            : 00:04:96:52:A7:1B (Default)
   Prefix Snooping      : Disabled

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the Switch Engine 32.6.3 Feature License Requirements document.