Remove a Switch from a Rack

Before removing a switch from a rack, verify that:

The removable power supply has been removed. See Remove and Replace an AC Power Supply.
The switch has been disconnected from all other sources of electrical power.

To remove a switch from a rack, follow these steps:

Unscrew the mounting brackets from the rack while carefully supporting the weight of the device.
Tilt the device so that the brackets are clear of the rack posts, and carefully lift it out of the rack.

If the device cannot be tilted (because other equipment is mounted directly above and below), remove one or two mounting brackets from the device and then slide the device out.

If you plan to use the device again later, store it with the mounting brackets attached.