Install the Switch

Before you attempt to install or remove an Extreme Networks switch, read the precautions in Safety Considerations for Installing Switches.

Extreme Networks switches fit into standard 19-inch equipment racks.

A two-post rack-mounting kit (part no. XN-2P-RMKIT-008) is provided with the switch. The installation process includes the following tasks:

1. Prepare to install the switch. See What You Will Need for the Installation.
2. Install the switch in the rack. See Attach the Switch to a Rack or Cabinet.
3. Install optional components: optical transceivers and cables. See the instructions in Install Optional Components.
4. Install an optional modular AC power supply. See Remove and Replace an AC Power Supply.
5. Connect network interface cables. See Connect Network Interface Cables .
6. Power up the switch. See Turn on the Switch .
7. Perform initial network connection and configuration. See Activate and Verify the Switch.