Power Cord Requirements for AC-Powered
Switches and AC Power Supplies
An AC power cord is not included with the AC power supply.
Power cords used with AC-powered switches or AC power supplies must meet the following
requirements:
- The power cord must be
agency-certified for the country of use.
- The power cord must have an
IEC320-C13 connector for connection to the switch or power supply.
- The power cord must have an
appropriately rated and approved wall plug applicable to the country of
installation.
- For cords up to 6 feet (2 m)
long, the wire size must be 18 AWG (.75 mm2) minimum; over 6
feet, the minimum wire size is 16 AWG (1.0 mm2).
