Extreme 7520 Series Overview

The Extreme 7520 Series are purpose-built 48-port 10Gb and 48-port 25Gb switches designed for high-performance aggregation and core applications. The Extreme 7520 provides end-to-end secure network segmentation and advanced policy capabilities. The 7520 Series are Universal Hardware, providing a user-selectable choice of Extreme‘s flagship switch operating systems.

The 7520 Series network hardware platform enables organizations to design networks that accommodate a variety of applications and east-west traffic patterns. With its high-density scale-out architecture, leading power efficiency, and airflow options, the 7520 Series platform delivers a cost-effective solution that optimizes power, cooling, and equipment room space, wherever your network operating center might be.

Management

An RJ45 serial console port on the front panel of the switch enables you to connect a terminal and perform local management. An Ethernet management port can be used to connect the system to an out-of-band management network for administration. Alternatively, you can use an Ethernet cable to connect this port directly to a laptop to view and locally manage the switch configuration. The Ethernet management port supports 10/100/1000 Mbps speeds.

There is also a Type A USB 2.0 port that can host removable devices like flash drives.

Cooling

Hot-swappable fan modules that provide either front-to-back or back-to-front airflow for switch cooling are available for 7520 Series switches. The six fan slots on all models are located on the rear panel. Switch fans are not responsible for cooling the power supplies; power supplies have integrated cooling fans that operate independently of the switch fan. The direction of the airflow in the fans and power supplies must be the same.

Fans are ordered separately for base models 7520-48Y-8C, 7520-48YE-8CE and 7520-48XT-6C. Fans are included with other models.

Power Supplies

Hot swappable 800 W AC or DC power supplies are available to power the switch. The power supplies have integrated cooling fans that operate independently of the switch fans. The fans provide either front-to-back or back-to-front airflow. The direction of the airflow in the power supplies and the switch fans must be the same. The two power supply slots on all models are located on the rear panel.

Power supplies are ordered separately for the base models 7520-48Y-8C, 7520-48YE-8CE and 7520-48XT-6C. Power supplies are included with other models.

For more information about the power supplies used in the 7520 Series switches, see Power Supplies for Use with Your Switch.

Stacking

Note

Note

The 7520-48YE-8CE switch models do not support stacking.

Each switch comes equipped with two stacking ports, also referred to as Universal Ethernet ports. The stacking ports are labeled U1 and U2 and are located on the front of the switch. When running Switch Engine, these ports can be used in either stacking mode or Ethernet mode. When in stacking mode, up to eight systems can be stacked using qualified direct attach cables and optical transceivers. By default the stacking ports operate as Ethernet ports. Use the enable stacking-support command to set the stacking ports in stacking mode. The stacking ports on 7520-48XT-6C models are ports 53 and 54. The stacking ports on 7520-48Y-8C models are ports 55 and 56.

When running Fabric Engine, the stacking (or Universal Ethernet) ports are reserved for use by advanced features on the switch by default. For more information, see the advanced-feature-bandwidth-reservation Boot Flag documentation in the Fabric Engine User Guide for your version of the Fabric Engine operating system.

Stacking cables are ordered separately.

For information about optical modules, see the Extreme Optics website.

For information about stacking, see Build Stacks.

Secure Boot

Secure boot establishes a chain-of-trust relationship in the boot process. The chain-of-trust is established by cryptographic checks at each stage of the boot process to validate the integrity and authenticity of the next stage before it can execute. The current implementation validates boot images. It cannot be disabled after it has been programmed on the device. There is no command-line interface or commands to enable or disable secure boot. The status of the boot image verification can be monitored in the operating system.

For more information, see Secure Boot.

Operating Temperatures

The 7520 Series supports the following operating temperatures with front-to-back cooling:

The 7520 Series supports the following operating temperatures with back-to-front cooling:

Feature Licensing

The 7520 Series switches support Unified Licensing, so that you can use them with multiple operating systems. There are two methods of acquiring feature licenses: manual or through ExtremeCloud™ IQ (XIQ).

For Switch Engine licensing, see the Feature License Requirements for your version of the Switch Engine software.

For Fabric Engine licensing, see the Licensing chapter in the Fabric Engine User Guide for your version of the Fabric Engine operating system.

For XIQ licensing, see ExtremeCloud IQ.