Log In for the First Time on Fabric Engine

Onboard your switch with ExtremeCloud™. Log in or create your XIQ administrator account in order to select your switch operating system with XIQ at https://extremecloudiq.com.

To perform the initial login and complete initial configuration tasks, follow these steps.

1. Use a terminal emulator such as PuTTY or TeraTerm to connect to the switch through the serial port connection.
   You can also connect to the switch via telnet or SSH. Be sure that your serial connection is set properly:

   • Baud rate: 115200
   • Data bits: 8
   • Stop bit: 1
2. Press [Enter] one or more times until you see the login prompt.
3. At the login prompt, log in using the default user name rwa.

   For example:

   login: rwa

   When prompted for the password, enter rwa.

When you are logged in with the role-based authentical level of rwa, you can configure the login and password values for the other role-based authentication levels.